HP LaserJet Enterprise 500 MFP M525f Error Code 13.B2.D2

Description
Paper input delay jam 1 (paper did not reach the registration sensor in time; no pick)
Tray 2; registration or Top sensor.

Recommended action
Recovery steps
1. Remove Tray 2.
2. Remove jammed paper if present.
3. Open top cover.
4. Remove the toner cartridge.
5. Lift the green flaps for access.
6. Remove jammed paper if present.
7.Reinstall cartridge and then close the top cover.

HP LaserJet Enterprise 500 MFP M525f Error Code 30.01.44 and 30.03.30

Error Code 30.01.44

Indication Problem.

Scanner firmware error.

Solution :

1. Turn the product off and then on.
2. Replace the formatter.

Scanner calibration failure.

Solution :

1. Upgrade firmware.
2. Replace formatter , setting ews dan inject hpec.
3. Replace scanner assy.
4. Cleaning fusing, gear and scanner.

5. Replace fax module.

HP LaserJet Enterprise 500 MFP M525f Error Code 13.D3.FF or 13.B2.FF

HP LaserJet Enterprise 500 MFP M525f Error Code 13.D3.FF or 13.B2.FF :

Description                                                      

Residual Media in Paper path jam 1 or 2 (paper detected in the paper path.)                                                        

When the product power is turned on, paper remains in the paper path, triggering the duplex sensor.

                                                       

3.D3.FF: Duplexer.

13.B2.FF: Registration or Top sensor.

Iphone Battery Fast Out?

Are you the Iphone 5/5s or Apple device you have upgraded to iOS 7 upwards? Surely you realize that your iPhone battery quickly drains. If you are still using 8 you can read IOS IOS problem 8. Here are some tips that have been tested and successfully help slow your Iphone battery in order not to run out quickly.

5 Problems and How to Fix iOS 8

1. Voice on the iPhone does not work

Many users complain that iOS on the iPad after updating iOS 8 speakers on the iPad they can not function, and of course it is disturbing to iPad users. But calm, do not panic if you experience this, because the following easy way to fix the problem.

Solution :

IPad Speaker Solution Not Working

• Press and Hold the lock with the home button simultaneously for 10 seconds until you restart the iPad and the Apple logo appears.

• Then, after re-lit, open the Settings menu> General and check under the menu Use Side Switch Too, and try to change the buttons Side Switch and make sure whether the change in the menu in the Control Settings.