Tips to Overcome Printer Printing Ink Not Out

Sample Printer

This can happen because there is no ink in the cartridge or the flow of ink unstable. It could also be due to a faulty printer spare parts etc.

Well here are some of the causes why when printing does  not come out of ink and the troubleshooting tips.

- Hose Printer Sandwiched

Hoses are squeezed causing the ink so could not walk normally for those who have Infusion system on the printer. The solution checks the overall start of the end of the hose that is attached to the ink reservoir until the hose attached to the cartridge, adjust and correct the position of the drip hose clamped.

- Printer Head blocked

The mean clogged printer head covered with ink, these conditions usually experienced when the printer using the printer infusion, then do not use the printer in parentheses relatively long time so that at the end of the ink printer head so covered with dried ink before.

- Cartridge Or Head Damaged

After applying the second rare-steps above but do not find a satisfactory answer, it means Printer Head is damaged permanently, you should replace the parts Head Printer (Epson) or Cartridge (canon)

- Cable Head Burned

Head Printer cable, the cable connecting the head with Mainboard Printer. Admin never experienced this problem on Epson R230 printer, which is caused by damage to the ink right there on the back of the head where the ends of the cable, causing an electric current surge and ended with damage. Cable Head then had to replace them with new ones and of course according to the type and brand of printer